No hay anuncio todavía.
Este es un tema pegajoso.
  • Filtrar
  • Tiempo
  • Mostrar
Limpiar Todo
nuevos mensajes

  • Extreme Injector v3.7

    Extreme Injector v3.7

    A powerful and advanced injector in a simple GUI! If you're wondering, this was coded in C#. This is a rewrite of the widely known v2.1 which can be found here.

    - Colourful and customizable GUI
    - Process List
    - Multi-DLL injection (with options to enable/disable DLLs to inject)
    - Auto-Inject
    - Stealth Inject
    - Close on inject
    - DLL Scrambling (scrambles DLLs on injection to make hacks harder to detect and make detected hacks work again)
    - 'Un-inject' DLLs
    - Mutiple injection methods (Standard, LdrLoadDll Stub, LdrpLoadDll Stub, Thread Hijacking and Manual Map)
    - Drag and drop support
    - 64-bit injection support
    - Automatic Visual C++ depedency installer
    - Execute exported functions after injection

    How to use:
    - Download and extract the attachment
    - Run Extreme Injector v3.exe
    - (optional) Click Settings and then Start in Secure Mode to avoid Anti-Cheat detection of the injector itself.
    - Type in a process name into the box (including the extension). If you want to target a specific process or select by window name, use the Select button.
    - (Note) If you are injecting into Combat Arms, make sure to type in Engine.exe
    - Add the DLLs you want by clicking on the Add DLL button. You can also drag and drop them into the DLL list.
    - You can disable/enable which DLLs to inject so you can keep your favourite DLLs without needing to find them each time.
    - Go into Settings and customise the settings to your liking. Everything should be straight forward (do not mess around with Advanced settings unless you know what you are doing).
    - (Note) If you are injecting into Combat Arms, make sure to tick Auto-Inject and start the game.
    - Click Inject and enjoy! (or wait for the process to start and let it auto-inject if you ticked auto-inject)

    Please explain the Injection Methods!
    This version of the injector introduces 2 new injection techniques.
    - Standard - This is the injection technique used in nearly every injector out there. It uses CreateRemoteThread and LoadLibrary and is the most reliable injection technique.
    - LdrLoadDll Stub - This is similar to the Standard injection technique except it goes 1 level deeper into LoadLibrary.
    - LdrpLoadDll Stub - This goes even another level deeper into LdrLoadDll. It may crash or cause errors on OSes newer than Windows 10 as it can change.
    - Thread Hijacking - This is a pretty stable method of injection that takes over already executing code to inject your DLL and is not used by many injectors.
    - Manual Map - This is the most secure injection technique. So secure that even Windows won't even know about the injected DLL. It may not work properly on OSes newer than Windows 10, you will be told what to do by the injector in that case.

    Please explain the Scramble Options!
    With the new version of Extreme Injector v3, there are way too many options to explain so I've created handy presets to make things easier:
    None - As the name implies, this means that DLL scrambling is disabled completely.
    Basic - This applies basic scrambling that should work with most DLLs.
    Standard - This applies even more scrambling options that should work with most DLLs.
    Extreme - Applies all scrambling options (the best/strongest preset) that could break some DLLs but should work with most.

    Please explain the Post-Inject Options!
    These post-inject techniques are often seen within hacks to try prevent detection from anti-cheats but this injector can do it externally if the hack doesn't do it already.
    - Erase PE - This erases the PE headers at the start of the injected DLL, making it hard for anti-cheats to identify that a DLL exists at a specific location.
    - Hide Module - This hides the DLL from the process' module list so if an anti-cheat were to search through a process' module list, it would not appear.

    Warning: Most modern anti-cheats these days can still easily detect DLLs even with these options enabled. The most secure method would be using manual map.

    Known bugs/limitations:
    - Thread Hijacking is not supported at all on XP 64-bit.
    - LdrpLoadDll has only been tested on XP, Vista, 7, 8, 8.1 and 10. It will probably not work on anything newer than that.
    - "Create new entrypoint" under scrambling advanced options does not support 64-bit DLLs.

    When using 'Start in Secure Mode'....
    If your anti-virus detects a threat/virus when you click on it, please ignore it or temporarily disable your anti-virus, it's a false positive. I would never infect any users with anything. Note that you should NOT add an exclusion to the Temp folder as any REAL viruses that emerge there might get through.

    Injection failed...?
    Try another injection method and see what happens. Feel free to take a screenshot or copy and paste the error message here so I can look into it. Make sure to mention what OS you are running.

    OMG, why is the injector connecting to the internet?
    So people can stay up to date, I've added a simple update check which connects to GitHub. It does not offer any direct links or download anything by itself.

    What's the Visual C++/DirectX depedency installer?
    What is the exported functions feature useful for?

    Please refer to the wiki entry on Github for more information.

    .NET Framework 4

    What's new?
    Changes since version 3.7 (28th April 2017): - Fixed manual map and LdrpLoadDll support for Windows 10 Creators Update - Fixed critical bug relating to imports resolution (issues when the same module is imported multiple times) - Fixed bug that led to many handles being opened unintentionally - Migration of Visual C++ resources and version checking to GitHub for more transparency  Changes since version 3.6 (5th September 2015): - Fixed manual map support for Windows 8.1 (for real this time) - Updated file host for Visual C++ dependencies - Added more aggressive dependency resolving of Microsoft DLLs (fixes SystemFunction036 in advapi32.dll)  Changes since version 3.5/3.5.1/3.5.2 (31st July 2015): - Fixed exception that occurs on DEP enabled processes on Windows 10. - Fixed bug with GUI under Advanced Options for injection. - The Disable SEH Validation option now actually does what it says. - Fixed critical bug relating to code that resolves exports for Windows 10 modules. - Fixed bug where exception would be thrown when no export function parameters were specified. - Fixed manual map support for Windows 8.1 (broken in 3.4).  Changes since version 3.4 (29th July 2015): - General stability fixes (crashes with 64-bit). - Updated compatbility with Windows 8.1 and 10 (blame Microsoft and their compatibility "fixes"). - Secure Mode now closes previous instance. - Fixed critical bug that would have prevented hacks using exception handlers (mainly packed/protected DLLs) from working in manual map mode. - Added DirectX dependency detection. - Added the ability to call exported functions after injection (use the ... button next to the listed DLL) - Added a simple update notification.  Changes since version 3.3 (17th June 2014): - Fixed bug where 1 CPU core was used because the injector was waiting for *itself* to close (no, it wasn't because of a RAT). - Fixed bug where attempting to unload a module on a 64-bit process resulted in an exception. - Fixed bug where the injector threw an exception from writing a scrambled DLL that was in use. - Added support for LdrpLoadDll on Windows 8.1 Update 1 (64-bit). - Added missing dependency required for ZIP extraction to work correctly (made the injector crash during Visual C++ Debug dependency installation). - Added a threads list to the process information window. - Added a new "Strip section characteristics" option to the Extreme preset of scrambling options. - Added a new "Shift section memory" option to the Extreme preset of scrambling options, should *significantly* improve the ability for hacks to evade anti-cheat detection. This option is much more powerful on 32-bit DLLs, but is still somewhat effective on 64-bit DLLs.  Changes since version 3.2 (9th June 2014): - Fixed bug where auto-inject did not seem to work - Addressed possible crashing from messages failing to display during injection  Changes since version 3.1 (3rd June 2014): - Fixed bug where a message box would appear randomly if a Visual C++ dependency was missing (leftover from testing code) - Fixed bug where selecting "No" from the prompt under Advanced in Injection Method would untick the wrong box - Injector now displays a message box saying that injection was successful  Changes since version 3.0 (31st May 2014): - Complete rewrite from scratch (same and familiar look from previous versions) - All injection techniques are now 100% compatible with 64-bit DLLs - Drag-and-drop fixed when run as administrator on newer OSes - Automatically elevates without asking if it knows you have administrator rights - Better scaling on displays with a DPI higher than 96 - Added a Visual C++ Dependency Installer - Manual map now supports DLLs that use SEH to work (better packer support, eg. Themida, Enigma, etc) - New injection technique: LdrpLoadDll - Better exception/error reporting - New scrambling engine, more scrambling methods - Removed "Append Random Data" as it just wasted disk space and is ineffective - Improved detection of different OS versions - Dynamic assembly code generation (powered by AsmJit) - Seperate process, thread and window manager, does not rely on .NET Process class anymore - "Start in Secure Mode" creates an even more "secure" instance of Extreme Injector
    DarthTon - Better manual map code (originally coded in C++, ported to C# by me, licensed under MIT).
    Darawk - Thread hijacking code concept.

    Virus Scans:

    If your anti-virus detects this as a virus, ignore it or add an exclusion. It is not a virus, you can run it under a sandbox and log every single thing it does, it's harmless. Once the injector gets more popular, it will be labelled as "riskware". This means that using it can be risky because the DLLs you inject could be malicious. I am not responsible for the hacks you download.

    If you get "System.Expection: The injection method used returned NULL", please right-click on the DLL you are injecting > Properties > Unblock > OK or use Manual Map injection.

    Editado por última vez por Wuilfredo; en 17-06-17, 19:17.

    Max Pop-ups "2" - Publicidad Amigable | 7 views por IP | Pagos Puntuales

  • #2
    Wuilfredo es importante descargar esta versión del inyector v3.7? Pregunto porque descargue el hack y me lo detecta el servidor.. ( Tengo desactivado el firewall y el antivirus. como de costumbre)


    • Wuilfredo
      Wuilfredo comentó
      Editar un comentario
      Puedes Inyectar El Hack Con el Extreme Injector v3.6 o v3.7 Con Cual Quieras xD

    • GamerVenezuela
      GamerVenezuela comentó
      Editar un comentario
      amigo me sale actualice el inyector a 3.7.1? ayudame wuilfredo

  • #3
    buenos dias wuilfredo ayudame x favor . descargue la version extreme injector v3.7. .. pero tengo un problema donde dice process nome. no se q colocarle alli . se q el point blank .. pero no se como ponerselo ayudame men x favor..


    • Wuilfredo
      Wuilfredo comentó
      Editar un comentario
      Pon Pointblank.exe y Pones el inyector en Manual Map y Auto Injec xD

    • GamerVenezuela
      GamerVenezuela comentó
      Editar un comentario
      amigo me sale actualice el inyector a 3.7.1? ayudame wuilfredo1

  • #4
    Bueno Tiene Algunos Errores Me Sale Error 715 D: Pero Bueno Solo Me Ah Salido 1 Vez xD Bueno Esperemos Ah Ver Como Va


    • #5
      Me pueden pasar los DLL
      Editado por última vez por Warxx; en 14-05-17, 18:14.


      • #6
        como lo descargo


        • Wuilfredo
          Wuilfredo comentó
          Editar un comentario
          Entra al Link de Descargar: Pasas la Publicida Hasta Llegar al Link de Sendspace y le das Descargar xD

      • #7
        Mi problema es el siguien..
        Habro el pb (lo tengo en pantalla completa) luego habro el hack luego inicio sesion y nunca me habre el juego
        probe abrir el juego y despues injectar el hack pero nunca me sale
        luego me dice que actualice la version del hack no es la ultima version o que???

        no mas problemas en si no me funcion o no se que pasa


        • Wuilfredo
          Wuilfredo comentó
          Editar un comentario
          Tienes que Descargar el Hack de Point Blank Todos los Dias .

        • Wuilfredo
          Wuilfredo comentó
          Editar un comentario
          Tienes que Descargar el Hack de Point Blank Todos los Dias :v

      • #8
        Si tengo un problema con el Kernel.32 al inyectar un dll, cual seria la solución ?


        • Wuilfredo
          Wuilfredo comentó
          Editar un comentario
          Ejecuta el Injector Como Administrador XD

        • elmaloss
          elmaloss comentó
          Editar un comentario
          ya intente y nada el FPS aun no me inyecta en el juego
          lo intente de varias maneras con el juego abierto y cerrado en modo de pantalla y pantalla completa
          Editado por última vez por elmaloss; en 14-06-17, 22:33.

      • #9
        Necesito una ayuda de verdad no sé donde se intalans los archivos -DLL- de todos los días, que alguien me explique porfavor.. ^^


        • #10
          Wuilfredo , amigo sabes porque cuando pongo el DLL a inyectarse en el juego me sale esto.

          An error ocurred while injectong "FPSLATINO 22-06.dll" into "PointBlankPatcher.exe"
          System.AccessViolationException: Unable to call the entrypoint(s) of the DLL.

          Que debo hacer?


          • Wuilfredo
            Wuilfredo comentó
            Editar un comentario
            Ejecuta el Injector Como Administrador y Configuralo a Manual Map y Auto Injec

          • AndrésPRO
            AndrésPRO comentó
            Editar un comentario
            Así lo hago amigo pero no me deja, me sigue saliendo esa ventana emergente. Aun sin tener el Pb abierto.
            Me ayudarias por Team Viwer?

        • #11

          Cómo funciona el hack de paredes?


          • #12
            Wuilfredo mano hay qe descargar la versión3.7 porq tengo la versionv3.6


            • Wuilfredo
              Wuilfredo comentó
              Editar un comentario
              Nel Bro Puedes Usar la Que Quieras

          • #13
            como descargo el Dll?
            desde que link?


            • #14
              Muy bien lo probare y gracias por la info


              • #15
                falta la dll para ser inyectada